GBP £
EUR € USD $
Home
product review overlay image
PRESTO USB High Speed Programmer - IC, dsPIC, AVR, Atmel 8051, eCOG, serial EEPROM & Flash, JTAG, CP

Product Description

PRESTO is a powerful, very fast and cost effective programmer for wide range of popular components - microcontrollers, serial EEPROM and Flash memory chip, CPLDs and others. PRESTO operates on the USB port and requires no external power supply.

High speed

PRESTO is optimized for speed and it is really very fast, for example the full PIC18F8720 is programmed and verified in 6 seconds! (3 seconds for programming and 3 seconds for verification). Complete eCOG1 in less than 3 seconds.

Many devices supported

Hundreds of devices are supported by the UP software and the list is growing continuously. Moreover, many other parts can be programmed using JTAG. For more information, see the paragraph "Wide range of supported devices" below.

Enhanced programming interface

In-Circuit Serial Programming (ICSP) is a very useful and often used PIC feature. PRESTO directly supports this function using a dedicated connector and an included cable. In comparison to other ASIX' programmers

Specifications

Brand
ASIX
Condition
New
Product Code
PRESTO
PRESTO is a powerful, very fast and cost effective programmer for wide range of popular components - microcontrollers, serial EEPROM and Flash memory chip, CPLDs and others. PRESTO operates on the USB port and requires no external power supply.

High speed

PRESTO is optimized for speed and it is really very fast, for example the full PIC18F8720 is programmed and verified in 6 seconds! (3 seconds for programming and 3 seconds for verification). Complete eCOG1 in less than 3 seconds.

Many devices supported

Hundreds of devices are supported by the UP software and the list is growing continuously. Moreover, many other parts can be programmed using JTAG. For more information, see the paragraph "Wide range of supported devices" below.

Enhanced programming interface

In-Circuit Serial Programming (ICSP) is a very useful and often used PIC feature. PRESTO directly supports this function using a dedicated connector and an included cable. In comparison to other ASIX' programmers
Brand
ASIX
Condition
New
Product Code
PRESTO

Microchip PIC®, dsPIC/PIC24® and PIC32® MCUs
Serially programmable devices (all Flash and the most popular OTP/JW).
Atmel AVR® and 8051 architecture MCUs
Devices with SPI low voltage serial downloading - for example ATtiny12, AT90S8535, ATmega128 and AT89S51. AVR devices with the TPI interface - e.g. ATtiny10.
32-bit ARM-based MCUs by various vendors
Texas Instruments MSP430® and CC430® MCUs
(Security Fuse blowing and Bootstrap loader memory programming is not supported).
Chipcon (now Texas Instruments) CCxxxx® MCUs
Cypress PSoC® MCUs
CY8U21xx, CY8U24xx and CY8U27xx.
Components with JTAG interface
- types which can be programmed using SVF or XSVF file - for example

    CPLDs - Xilinx (XC95xx, CoolRunner, ...), Altera, Lattice and others
    FPGA configuration Flash PROMs - Xilinx (XC18Vxx, XCFxxS)
    Atmel ATmega

Serial EEPROM and Flash memories

    I2C (24LCxx)
    Microwire (93LCxx)
    SPI EEPROM (25Cxx)
    SPI Flash EPROM (M25Pxx, M45PExx, ...)

Full device support list

PRESTO USB High Speed Programmer - IC, dsPIC, AVR, Atmel 8051, eCOG, serial EEPROM & Flash, JTAG, CP

Out of stock

Product Code PRESTO
VAT Number: GB768666563 Registered company: 4136703
© BURN TECHNOLOGY LIMITED